The MORGAM Data Centre (MDC) checks all data received from the MORGAM Participating Centres (MPC) according to these edit specifications at the time when the data are included into the MORGAM data base. All possible inconsistencies revealed in the data are reported to the MPC using Computer Generated Error Correction Form, or by other means if the number of possible errors in the data is very large.
Every record entered into the MDC data base is subjected to the constraints listed below. If the data do not meet the conditions of the constraint, an error message will be generated. Such error messages are printed on a Computer Generated Error Correction Form.
Data values which do not meet the conditions of a constraint, are either incorrect or unusual. All data values printed on the Computer Generated Error Correction Form should be checked from the source of the data. However, such values should not be changed unless they can be shown to be incorrect.
Univariate checks |
| Constraint name | Description |
|---|
| CENTRE_LIMITS_88 | Accepted values for CENTRE are: 11, 12, 19, 20, 22, 26, 31, 32, 34, 35, 36, 37, 39, 45, 47, 54, 55, 57, 59, 60, 71, 72, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 99 |
|---|
| COHORT_LIMITS_88 | Accepted values for COHORT are: 01 to 03, 21 to 99 |
|---|
| RUNIT_LIMITS_88 | Accepted values for RUNIT are: 01 to 08 |
|---|
| SERIAL_LIMITS_88 | Accepted values for SERIAL are: 1 to 999999 |
|---|
| SEX_LIMITS_88 | Accepted values for SEX are: 1 to 2 |
|---|
| FASTING_LIMITS_30 | Accepted values for FASTING are: 1 to 3, 9 |
|---|
| FIBRDL_LIMITS_30 | Accepted values for FIBRDL are: 100 to 998, 8888, 9999 |
|---|
| FIBR_LIMITS_30 | Accepted values for FIBR are: 100 to 998, 8888, 9999 |
|---|
| FORM_LIMITS_30 | Accepted values for FORM are: 30 |
|---|
| ROUNDS_LIMITS_30 | Accepted values for ROUNDS are: 1 to 99 |
|---|
| TRIGLDL_LIMITS_30 | Accepted values for TRIGLDL are: 27 to 98, 100 to 998, 1000 to 1005, 8888, 9999 |
|---|
| TRIGL_LIMITS_30 | Accepted values for TRIGL are: 30 to 98, 100 to 998, 1000 to 1200, 8888, 9999 |
|---|
| VERSN_LIMITS_30 | Accepted values for VERSN are: 2 |
|---|
Multivariate checks |
| Constraint name | Description |
|---|
| COHORT_CENTRE_88 |
If CENTRE = 11 then COHORT should be: 01, 02, 03 |
| If CENTRE = 12 then COHORT should be: 01, 02, 03 |
| If CENTRE = 19 then COHORT should be: 01, 02, 03, 42, 43 |
| If CENTRE = 20 then COHORT should be: 01, 02, 03, 24, 25, 26, 34, 42, 43, 44, 45, 46, 52, 53, 54, 55, 62, 63, 64, 72, 73, 82 |
| If CENTRE = 22 then COHORT should be: 21 |
| If CENTRE = 26 then COHORT should be: 01, 02, 03, 24, 33, 34, 42, 52 |
| If CENTRE = 31 then COHORT should be: 01, 21, 22, 23, 24, 25, 42, 43 |
| If CENTRE = 32 then COHORT should be: 01, 02, 03, 21 |
| If CENTRE = 34 then COHORT should be: 21 |
| If CENTRE = 35 then COHORT should be: 01, 02, 03, 21, 42, 43 |
| If CENTRE = 36 then COHORT should be: 01, 02, 03 |
| If CENTRE = 37 then COHORT should be: 01, 02, 03, 21 |
| If CENTRE = 39 then COHORT should be: 01, 02, 03 |
| If CENTRE = 45 then COHORT should be: 01, 02, 03, 31, 32, 33, 34, 35 |
| If CENTRE = 47 then COHORT should be: 01, 02, 03, 21 |
| If CENTRE = 54 then COHORT should be: 21 |
| If CENTRE = 55 then COHORT should be: 21 |
| If CENTRE = 57 then COHORT should be: 01, 02, 03, 21 |
| If CENTRE = 59 then COHORT should be: 21 |
| If CENTRE = 60 then COHORT should be: 01, 02, 03, 24 to 26, 42 to 44, 52 to 54, 62 to 64, 72 to 74, 84 |
| If CENTRE = 71 then COHORT should be: 21 |
| If CENTRE = 72 then COHORT should be: 21, 43 |
| If CENTRE = 73 then COHORT should be: 21 |
| If CENTRE = 74 then COHORT should be: 21, 31, 42, 43 |
| If CENTRE = 75 then COHORT should be: 21 |
| If CENTRE = 76, 79 then COHORT should be: 21 |
| If CENTRE = 78 then COHORT should be: 21, 43, 45, 46 |
| If CENTRE = 83 then COHORT should be: 24, 42, 43, 44 |
| If CENTRE = 84 then COHORT should be: 21, 42, 43 |
| If CENTRE = 99 then COHORT should be: 01, 02, 03, 21 |
| RUNIT_CENTRE_88 |
If CENTRE = 12 then RUNIT should be: 01, 02 |
| If CENTRE = 19 then RUNIT should be: 01 |
| If CENTRE = 20 then RUNIT should be: 02, 03, 05, 06, 07, 08 |
| If CENTRE = 22, 37 then RUNIT should be: 01, 02, 03 |
| If CENTRE = 26 then RUNIT should be: 03 |
| If CENTRE = 31 then RUNIT should be: 01, 02, 03, 04 |
| If CENTRE = 32 then RUNIT should be: 01, 02, 03, 04, 05, 06 |
| If CENTRE = 34, 54, 55, 59 then RUNIT should be: 01 |
| If CENTRE = 35 then RUNIT should be: 01, 02, 03 |
| If CENTRE = 36 then RUNIT should be: 01, 02 |
| If CENTRE = 39 then RUNIT should be: 03 |
| If CENTRE = 45 then RUNIT should be: 01 |
| If CENTRE = 47 then RUNIT should be: 01, 03 |
| If CENTRE = 57 then RUNIT should be: 01, 02, 04, 05 |
| If CENTRE = 60 then RUNIT should be: 01, 02 |
| If CENTRE = 71, 78, 79, 80, 84 then RUNIT should be: 01 |
| If CENTRE = 72 then RUNIT should be: 01 |
| If CENTRE = 73 then RUNIT should be: 01, 02, 03 |
| If CENTRE = 74 then RUNIT should be: 01 |
| If CENTRE = 75 then RUNIT should be: 01 |
| If CENTRE = 76 then RUNIT should be: 01, 02 |
| If CENTRE = 83 then RUNIT should be: 04 |
| FIBR_FIBRDL_30 |
If FIBR = 0 to 8887, 9999 then FIBRDL should be: 8888,9999 |
| If FIBRDL = 0 to 8887, 9999 then FIBR should be: 8888,9999 |
| TRIGL_TRIGLDL_30 |
If TRIGL = 0 to 8887, 9999 then TRIGLDL should be: 8888,9999 |
| If TRIGLDL = 0 to 8887, 9999 then TRIGL should be: 8888,9999 |
